To make soda bottle water, industrial manufacturers use a process called carbonation. This involves dissolving carbon dioxide gas in water, under pressure, to create the bubbles that give soda its fizz. The water is then bottled and sealed in containers, typically made of plastic, to preserve the carbonation.

1.Got soda plastic bottle and soda bottle cap

Soda plastic bottle bottom is different with water bottle or juice bottle bottom. The soda plastic bottle have a 5 bumps (corrugation) at the bottom which not designed for beauty outlook. Because the soft drinking need lowering temperature to 3-5degree to good mixer with CO2. ( https://www.cnet.com/home/kitchen-and-household/appliance-science-the-compressed-chemistry-of-carbonation/ )

When filling cooling soft drinking into bottle. The bottle volume been changed and the bottle must not buckle because of this change in volume. The corner or the tip of the bump can slightly expand/contract without breaking which takes care of the change in volume of the liquid.

Facts for U: Why do Soft Drink Bottles have 5 bumps at the bottom??

2.Buy CO2 tank from local or CO2 company

CO2 is most important to mixer with pure water and producing soda water. It is better to got CO2 from local because it is belong dangerous liquid when shipment. Only have license CO2 company allow to complex shipment by sea.

If you are a commercial manufacturer of soda and you need a larger CO2 tank for your operations, you can purchase one from a local supplier or a company that specializes in providing industrial-sized CO2 tanks. These companies can provide tanks in a range of sizes, depending on your needs, and can also help you with installation and maintenance. It’s important to choose a reputable supplier with experience in providing CO2 tanks for the food and beverage industry, to ensure that you get a high-quality product and reliable service.

3. Soda water bottling machine

Once you have your CO2 tank and carbonation system in place, you will need a soda water bottling machine to package your product. There are many different types of soda water bottling machines available, ranging from small, manual systems to large, fully-automated machines. When choosing a soda water bottling machine, it’s important to consider factors such as the size and capacity of the machine, the type of bottles it can accommodate, and the level of automation and control it offers. You should also consider the overall cost and the availability of spare parts and technical support.

In normal temperature, pure water can only mixer a little CO2 which is meaningless. To reach industrials standard. It need mixer a lot CO2.
When the water temperature low to 3-5degree, It have a good mixer CO2. So the first step is cooling the water into 3-5 degree. Then use the CO2 mixer machine to mix the water with CO2.
Then use presssure balance filling machine to filling the soda water into the bottle and fast capper for seal well the bottle.

Metarials: CO2 tank, soda bottle, pure water,

Cooling machine, mixer machine, balance filling machine

The post How to industrials make soda bottle water? appeared first on Water Filling Machine For Sales.

2 step Making Bottle

It is use 2 step to making bottle. The first step is injection molding an hollow hard tube.

Why did not injection molding into a plastic bottle. Because the inject technology is difficult to molding an bottle thin enough.

So it need first use pet making machine molding into an hollow hard tube which we also called it preform.

A lot bottled water company buy preform directly. Because it is cheap and easy for freight.

Then the second step is blowing the preform into plastic bottle.

It need an bottle blow molding machine. The blow molding machine collect a lot funcation in one machine. It first automatic loading preform into heating space. After heating well, moving the preform into the blow and blowing air into the preform. Then blowing the preform into the blow mold shape.

Through change blow mold then can produce different shape and volume plastic pet bottle.

The post How to making pet plastic bottle appeared first on Water Filling Machine For Sales.

Industry use electricity is different with house use. It is three phase voltage. A lot Country eletricity supply is not stable. Some factory location is far from city so that do not have eletricity at all. So that need an diesel generator power. Also, a lot Country diesel is cheap, use generator power is cheap.

Power box

Just integrated all switch and line into an box, protect use eletricity and make sure safe. And integrated Ammeter and Voltmeter, so that can see all electricity detail easy.

Breaker. It is made inside of the power box according factory inquiry.

Inside of the power box

Wire line. 5-in-1

The post How to do eletricity connection of water bottling factory appeared first on Water Filling Machine For Sales.